westernsubaruclub.com

Technical => JDM Import Technical Discussion => Topic started by: 05LGT on December 21, 2017, 08:56:21 AM

Title: EJ20G Oil Seperator Plate Replacement
Post by: 05LGT on December 21, 2017, 08:56:21 AM
Picked up a 96 WRX (EJ20G) and it’s leaking oil between the engine and the trans pretty badly, almost guaranteed its the oil seperator plate. Can anyone confirm the part number and suggest a place to buy it with fairly quick shipping? I’d like to get this trans out and get this repair done before the beginning of January passes me.
Title: Re: EJ20G Oil Seperator Plate Replacement
Post by: seat safety switch on December 21, 2017, 08:02:41 PM
The upgraded separator plate for the North American turbos/NAs is 11831AA210, the bolts are 6x 800406150 see below

Dude on eBay sells the kits here: https://www.ebay.com/itm/Subaru-Oil-Separator-6-Lock-Bolts-WRX-Impreza-STi-Forester-Outback-Legacy-OEM-/190837236897
Title: Re: EJ20G Oil Seperator Plate Replacement
Post by: 05LGT on December 22, 2017, 09:01:41 AM
The upgraded separator plate for the North American turbos/NAs is 11831AA210, the bolts are 6x 800406150

Dude on eBay sells the kits here: https://www.ebay.com/itm/Subaru-Oil-Separator-6-Lock-Bolts-WRX-Impreza-STi-Forester-Outback-Legacy-OEM-/190837236897

Thanks SSS
Title: Re: EJ20G Oil Seperator Plate Replacement
Post by: RedBimmer93 on January 02, 2018, 11:29:35 AM
The upgraded separator plate for the North American turbos/NAs is 11831AA210, the bolts are 6x 800406150


The screws in this kit should be 5x 800406140 and 1x 800406150. The one screw near the crankshaft (where the arrow is pointing on the separator plate) is shorter, and is made of a different material.

(https://images-na.ssl-images-amazon.com/images/I/81gJWHn0WIL._SX450_.jpg)
Title: Re: EJ20G Oil Seperator Plate Replacement
Post by: 05LGT on January 02, 2018, 12:29:57 PM
Ordered up today, Centaur parts was very easy to deal with and knew what I was talking about so +1 for them.
Title: Re: EJ20G Oil Seperator Plate Replacement
Post by: seat safety switch on January 04, 2018, 11:04:49 AM
The screws in this kit should be 5x 800406140 and 1x 800406150. The one screw near the crankshaft (where the arrow is pointing on the separator plate) is shorter, and is made of a different material.

(https://images-na.ssl-images-amazon.com/images/I/81gJWHn0WIL._SX450_.jpg)
Good catch, thanks.