Author Topic: Zac's 2005 LGT Wagon (Read 39092 times)

SlowLGT · « **Reply #275 on:** June 20, 2017, 08:10:41 pm »

Is that a xv crosstrek with JDM STI exterior pieces?

Zac · « **Reply #276 on:** June 20, 2017, 08:51:32 pm »

Quote from: SlowLGT on June 20, 2017, 08:10:41 pm

Is that a xv crosstrek with JDM STI exterior pieces?

Yes

diamondedge · « **Reply #277 on:** June 20, 2017, 11:25:31 pm »

I'll leave this here

Unless you wanna raise the LGT and go OBXT style, but with the lips and stuff.

Which would be cool.

Zac · « **Reply #278 on:** June 21, 2017, 12:13:57 am »

Problem is that I want an Auto and something I can rallycross more often. I don't know how much more abuse my motor can take.

Claw · « **Reply #279 on:** June 21, 2017, 12:20:44 am »

Quote from: Zac on June 20, 2017, 08:51:32 pm

Yes

Looks great!

Zac · « **Reply #280 on:** July 16, 2018, 01:27:19 pm »

http://imgur.com/gallery/a5jI4c2

Don't know how to link directly from my phone so here's an imgur gallery.
First 2 pictures are some DAMD fenders that I got for a good price. And 3rd picture is a project that's been taking a lot of my time.

RedBimmer93 · « **Reply #281 on:** July 22, 2018, 03:00:47 pm »

Hot damn, those fenders!!

Also, new build thread for second project??

Zac · « **Reply #282 on:** July 23, 2018, 09:37:52 am »

Maybe at a later date. Spending most of my time reading old manuals and forums to get more information on it and how to fix some of the issues I'm having

Zac · « **Reply #283 on:** July 02, 2019, 07:39:47 pm »

Took some video of the whole process, working on it right now.

jellynuts · « **Reply #284 on:** July 02, 2019, 10:30:23 pm »

Thanks for sharing. I may have missed it, but you can paint that stuff directly over paint? They couldn't have given you a smaller can eh? Why did you choose Eastwood over Por15?

Zac · « **Reply #285 on:** July 03, 2019, 10:25:06 am »

I was ordering Eastwood body hammers so I thought I should try it. I'm not sure if you're supposed to put it directly over paint and it mentions just to wire brush loose rust off and put it on. The demonstration video I watched they just sprayed it on a rusty frame.

jrho · « **Reply #286 on:** July 03, 2019, 01:22:26 pm »

Solid video and I've never actually seen just the outback flare installed. Doesn't look too bad and it kind of reminds me of the Civic Type R rear flare! I'll be needing to do some rust repair to my Legacy as well and I've been debating installing a flare or repainting the entire rear quarter panels after the fix

tperkins · « **Reply #287 on:** July 03, 2019, 01:29:12 pm »

Slow clap for starting the video without saying "Yo guiz, what's up"

Zac · « **Reply #288 on:** July 03, 2019, 02:52:30 pm »

Quote from: jrho on July 03, 2019, 01:22:26 pm

Solid video and I've never actually seen just the outback flare installed. Doesn't look too bad and it kind of reminds me of the Civic Type R rear flare! I'll be needing to do some rust repair to my Legacy as well and I've been debating installing a flare or repainting the entire rear quarter panels after the fix

If you're looking to go super wide I have a set of flares made for the legacy made by this guy: https://legacygt.com/forums/showthread.php/bought-me-3-0r-lots-custom-goodies-flared-evo-x-219871.html

Zac · « **Reply #289 on:** July 03, 2019, 02:54:12 pm »

Quote from: tperkins on July 03, 2019, 01:29:12 pm

Slow clap for starting the video without saying "Yo guiz, what's up"

Haha yea I'm not looking to be a "youtuber" but when I uploaded the videos of working body work on Yvans old WRX I got a lot of questions so I just want to share a bit of knowledge on different ways of attacking body work on these cars.

YvanF · « **Reply #290 on:** July 11, 2019, 09:29:40 am »

Quote from: Zac on July 03, 2019, 02:54:12 pm

Haha yea I'm not looking to be a "youtuber" but when I uploaded the videos of working body work on Yvans old WRX I got a lot of questions so I just want to share a bit of knowledge on different ways of attacking body work on these cars.

Miss that wagon everyday!

Claw · « **Reply #291 on:** July 11, 2019, 10:10:53 am »

I need to do the exact same fix. Where'd you get your supplies from? Mine's not as bad as yours though..

Thanks for making the video.

Zac · « **Reply #292 on:** July 11, 2019, 12:28:37 pm »

Quote from: Claw on July 11, 2019, 10:10:53 am

I need to do the exact same fix. Where'd you get your supplies from? Mine's not as bad as yours though..

Thanks for making the video.

Amazon and Eastwood as I could never make it to the paint supply store on time during the week.

Claw · « **Reply #293 on:** July 11, 2019, 03:03:21 pm »

I don't have a grinder.. can I just use sandpaper and a drill with a wire wheel?

Zac · « **Reply #294 on:** July 14, 2019, 05:04:24 pm »

Probably could, the rust encapisilator only wanted loose metal to be taken off with a wire brush so one on a drill should do the trick.

Zac · « **Reply #295 on:** September 30, 2019, 09:41:57 pm »

https://jdmracingmotors.com/en/subaru/impreza-wrx-5mt-manual-transmissions/5579/usdm-legacy-gt-2-5l-my05-push-type-transmission-for-sale-wrx-2006-2014/

bought this.

Zac · « **Reply #296 on:** March 01, 2020, 08:15:46 pm »

https://imgur.com/gallery/rA1qzqG
Was bored and wanted better lighting on my beater daily

Zac · « **Reply #297 on:** April 27, 2020, 06:26:33 pm »

Also ordered 225/50R18 Pilot Sport A/S 3

Should have the rest of paint supplies needed for my new "DAMD" front end this week as well.

JJx · « **Reply #298 on:** April 28, 2020, 01:55:43 am »

Lifting a legacy? When I had my outback I always wanted it somewhere between the oem legacy and skyscraper outback height. That lift kit looks like it might put you into the sweet spot.

Why the replacement transmission?

Zac · « **Reply #299 on:** April 28, 2020, 02:22:04 am »

Center diff failed