Author Topic: Group-N mounts for 2.5L  (Read 1733 times)

0 Members and 1 Guest are viewing this topic.

Offline GloomyX

  • Stubbly Faced
  • **
  • Posts: 18
  • Location: Calgary NW
  • Ride: 2002 TS Wagon
Group-N mounts for 2.5L
« on: January 16, 2013, 12:37:02 pm »
Are the Group-N mounts (engine and transmission) only available for WRX and STi?

Offline Way-do

  • Beards Comin in Nice
  • ****
  • Posts: 878
  • Location: Calgary NW
  • Ride: 2018 Focus ST
Re: Group-N mounts for 2.5L
« Reply #1 on: January 16, 2013, 12:57:38 pm »
I installed them on my 2001 RS.  Can't remember if I had to swap mount plates.

Trans mount didn't fit worth a hoot.  Had to hog out one of the holes.

Offline Zaider

  • WSC Supporter
  • Rivaling ZZ-TOP
  • *****
  • Posts: 12621
  • <shifty eyes>
  • Location: Calgary, AB
  • Ride: Oh look at the kitty!
Re: Group-N mounts for 2.5L
« Reply #2 on: January 18, 2013, 09:57:03 am »
For the GD, they're the same.

Make sure you install the 5-speed Group N transmission mounts. Engine should be identical.
Go home Subaru. You're drunk.
Quote from: seat safety switch
audis are disposable suicide machines with 700lb of stupid interior itshay glued to them and 200 more horsepower than it needs so that their owners can never bring on track or drive anywhere more aggressively than a camry except when weaving in and out of traffic and letting the traction control soak up their incompetence

Offline veloz

  • Vendor
  • Stubbly Faced
  • *
  • Posts: 19
  • Remember, it's what's INSIDE that counts.....
  • Location: Calgary
  • Ride: 400ish AWHP 2004 STi
Re: Group-N mounts for 2.5L
« Reply #3 on: November 17, 2013, 05:12:42 pm »
I did this the other day on my car.

Here is a good write up I used as a guide.

http://www.iwsti.com/forums/how-install/98375-install-guide-sti-group-n-engine-mounts.html

Remember, it's what's INSIDE that counts.....