Topic: Powersource Performance

[KennyB]

So after 7 years of collision repair on BMW, Mercedes and other luxury vehicles I have decided on a new career path. I left the world of unappreciative, self entitled unwilling customers to get into the side of the automotive industry I enjoy more which is aftermarket parts, installations and modifications which is also going to benefit all you.
I just joined the team at Powersource Performance to add my skills and experience to their vast  knowledge of aftermarket electronics and suspension sales and installation and will now be offering a 15% discount on product and reduced labour rates to WSC members.
Brands we carry include Beltronics, Audison, JL Audio, Alpine, JVC, Pioneer, Compustar, Polar Start, Autostart and Viper. Suspension from KW, ST, Airlift, AirRex, Accuair, Viair and Air Zenith. As well as Extreme Dimensions products who make just about every style aftermarket body panel you can think of.
We also have a few Subaru Projects in the works that I will follow up with as they are finished as well as product updates and promotions and look forward to being involved with the community in a new way. Any questions or inquires can be left here for other members benefit or PM'd to me.
Thanks,
Kenny.

[e13tankbuster]

Was that white GR hatch getting pocket flares?

[KennyB]

Yes the flares are already fit and modified as they are for a sedan, quarters cut and bonded back together, fenders cut and waiting to get the flares back from paint.  They are a little over schedule as I sent then back for a redo because I'm picky as *uck but will be gorgeous when done. 

[jellynuts]

Can you post pics of work projects/builds like Dales and Touge?

Also, congrats on the new job

[STI 2NV]

Congrats, I didn't know that shop had such a wide variety of talents.

[Dev]

Nice, another place I can go to for a new deck and starter

[Jay89]

Kinda wish I knew of this sooner

[KennyB]

Thanks guys! And yes Jelly I will be posting pictures of the projects that we have come though.  Should have some good eye candy to post in the next few days.

[KennyB]

As promised.
Flare install #1. Quite a bit of modification was done as they were meant for a sedan and needed to be trimmed down and the fibreglass side skirt extensions and spats modified to fit over the flares. Still may need some final trimming when the new wheels are installed to make clearance.

[rcubed]

Thanks again KennyB!

Kept be updated the entire time with photos throughout the process and very scrutinizing for the quality of the paintwork.
Im very happy with the work done by Kenny and Powersource.

Took some quick shots of the car the other night:



He trimmed the rear flare (as it was meant for the sedan) and notched the side skirts and rear spats to make it all fit nicely.

Wheels and beefier summer tires are enroute so Ill do a proper photoshoot once those come in.

[kokirigreen]

Sweet deal!

[deedz]

Those flares look great!

[Markkenko]

Awesome! Looks like I know where i'll most likely be getting some audio stuff this spring!
Congrats on the job!

[KennyB]

So while cruising through some of our distributors sites at work I discovered that I have line on Extreme Dimensions who make quite the array of aftermarket body kits also available as individual pieces and have actually been sizing up their zero sport replica rear bumper as I have always loved them for the past year or so but have been holding back on it knowing that shipping and brokerage will probably be more than the bumper itself. But with getting them direct form a distributor now will majorly cut back on those costs and be able to get them within a very reasonable price point.
 http://extremedimensions.com/home.php
Also have been getting allot of questions regarding ST suspension which I can get you all for 15% off msrp which is just a couple hundred more than a pair of BC's for a much better coilover made by KW. Take note they do not come with top hats or camber plates but is a good chance to go with the comfort of stock or group N mounts or upgrade to something better than a generic sub $2000 coilover camber plate. I am currently working on finding some options for mounts to be able to provide a customizable package but cannot find anything from current vendors so may have to branch out elsewhere which we really need to do anyways so I can have access to products from more brands useful to us.

[bugafreak]

Keep up the good work Kenny.