So while doing this swap, I used a 04 sti wiring harness and am attemping to splice in 02 wrx plugs to connect to a Haltech Platinum Pro. In my haste I cut off the 04 sti ecu plugs to wire in the wrx ones without looking at a 04 sti pinout prior.
EDIT yeah phoned iwire, have to rip the entire loom out again. Apparently there are too many differences in the sti loom and what i really needed was a wrx loom.
Now I am insure of what wire does what on the sti loom, but have a pinout of the wrx plugs. Does anyone have any suggestions as for figuring out which wire is which in the sti loom?
