Again, push him out of B-street. I feel like you're not getting this. He's likely looking to do what Asstuna did to the Focus... Replace all the bushings with fresh ones, upgrade the front sway (done), potentially replace the shocks with Koni's depending on cost (unlikely), upgrade to new pads, replace the rotors, etc.
In B-street the only mods you're allowed is any exhaust post-cat as long as it exits behind the driver, a single sway (front or rear), shocks, and comfort + convenience.
You need to use stock sized wheels (up or down 1" in diameter, same width, within 6mm of OEM offset), any sized tires that will fit without modifying the wheels or fenders, and that's pretty much it.