Author Topic: lake louises finest- this is where we say goodbye... (Read 11715 times)

Dutchy · « **Reply #25 on:** May 16, 2014, 12:30:23 pm »

Get it tuned before you go. If there is any problems air boy will fined them during the tuning process.

LilDrunkenSmurf · « **Reply #26 on:** May 16, 2014, 12:53:44 pm »

If you're going to run into any issues, it will probably be on the dyno, not the road afterwards.

lakelouise02bugeye · « **Reply #27 on:** June 11, 2014, 12:42:26 pm »

Well its come time. I cant find the problem myself so the car is going into vex and im saying fix it...
Ill probably just leave the credit card on the dash ass-well

lakelouise02bugeye · « **Reply #28 on:** June 16, 2014, 03:22:15 pm »

well while i was replacing my alt belt today i noticed that the turbo inlet looked a little odd... it looks like the clamp wasnt on properly and it doesnt have a tight seal currently investigaiting and will update tonight, could this really be the end to the problems? could it be tis simple?

lakelouise02bugeye · « **Reply #29 on:** June 16, 2014, 03:42:14 pm »

negative- i fooled myself into thinking it was off, just to realize once i could get my hands down there that it extended further than i thought.

Airboy · « **Reply #30 on:** July 07, 2014, 09:10:14 pm »

When you saw 100% injector duty before, was it "Injector Duty Cycle" or "Fuel Pump Duty"?

lakelouise02bugeye · « **Reply #31 on:** July 07, 2014, 09:19:58 pm »

Quote from: Airboy on July 07, 2014, 09:10:14 pm

When you saw 100% injector duty before, was it "Injector Duty Cycle" or "Fuel Pump Duty"?

Injector duty cycle, i only got it on one log like that, the previous log and the log after peaked around 84 if i remember, but all logs showed afr in the 20s

Did the plugs and packs last week, the plugs were really white, also replaced the rear o2.

Did you get a look at the car today?

Airboy · « **Reply #32 on:** July 07, 2014, 09:29:25 pm »

When I checked it today, IDC was <30%, with the MAF readings ~80g/s, when it should be much higher. The MAF sensor is damaged.

lakelouise02bugeye · « **Reply #33 on:** July 07, 2014, 09:34:30 pm »

Quote from: Airboy on July 07, 2014, 09:29:25 pm

When I checked it today, IDC was <30%, with the MAF readings ~80g/s, when it should be much higher. The MAF sensor is damaged.

Should i grab one from auto value tomorrow and bring it in or do you have one at the shop? I didnt get a call today so i assume its still in the shop

Airboy · « **Reply #34 on:** July 07, 2014, 10:08:25 pm »

Don't get MAF from part stores. You need the oem/denso unit. I verified with my spare MAF.

lakelouise02bugeye · « **Reply #35 on:** July 07, 2014, 10:27:38 pm »

ill pick one up via world pac they carry denso, when you say that you confirmed with your spare maf does that mean the proble IS the maf? cause thats about the only thing i havent changed

LilDrunkenSmurf · « **Reply #36 on:** July 08, 2014, 06:55:59 am »

Quote from: lakelouise02bugeye on July 07, 2014, 10:27:38 pm

ill pick one up via world pac they carry denso, when you say that you confirmed with your spare maf does that mean the proble IS the maf? cause thats about the only thing i havent changed

That's what I took away, is that he put on a good MAF, and things got better.

lakelouise02bugeye · « **Reply #37 on:** July 08, 2014, 09:44:10 pm »

well after dropping the car off at vex it was confirmed that the MAF was damaged and needed to be replaced, now that my issues are solved i have a v3 AP on the way ass-well which im super excited for.

LET THE TURBO BUILD CONTINUE!!!

ZiG · « **Reply #38 on:** July 08, 2014, 11:40:20 pm »

mmmmmmmmm v3

lakelouise02bugeye · « **Reply #39 on:** July 14, 2014, 12:13:34 pm »

well my car is old and i see no point in doing an expensive respray. the plastidip will cost me about 650 all said and done, that includes all the paint and a spray station

Rathburn · « **Reply #40 on:** July 14, 2014, 12:18:22 pm »

Quote from: lakelouise02bugeye on July 14, 2014, 12:13:34 pm

well my car is old and i see no point in doing an expensive respray. the plastidip will cost me about 650 all said and done, that includes all the paint and a spray station

Do something bright and flashy. If you're gonna do it, might as well make it stand out from the crowd!